Vislink UltraReceiver User Manual page 3

Version Date
1 7/2/2018
2 29/3/18
3 06/11/18
Issue No: 3
Ref: ULRX-ASUM-700X
First Issue
Updates:
Section 3.1 adding DVB-T as a future option
Section 3.5 to remove packet diversity and future option from Framelock
input
Section 3.11 removing future options ASI/IP input and MPEG2 license bullets
Section 3.12.1 Inputs and outputs for future options and UHD/HD Video
outputs
3.12.1 remove incorrect ASI IN content
3.13.3 remove future option from title
Added Section 5.2.5 Genlock
Section 6.4.2.2 now 6.4.2.1 and updated last sentence (now Section
5.4.2.2 and Section 5.4.2.1 respectively)
Removed:
Section 3.13.11 – Ethernet – Video over IP
Section 5 menu overview
Section 6.1.4, Section 6.2.4.1 Descrambling,
Section 7.2.1 DVB-T
Section 7.5 through Section 7.8.
General updates to remove future options to new functionality
Updated Demodulation Options bandwidth to 24 MHz.
Updated Note in Section 3.13 for Dual Pedestal.
Updated note in Section 5.2.5 Genlock for Lock status
Updated access receiver settings via webpage in Section 5.7
Removed old Section 6.1 Self-Test
Updated Section 6.3 Down-Converter Type removed table and replaced with
updated content.
Removed Firmware update procedure from Section 7.2. Now refer users to
the firmware release notes on the FTP site.
Modification FW Ver.
V5002 full unit
V6000 decoder
only variant.
V6006 full unit
V6006 decoder
only variant.
V10t4 Unit
V1.4.1 Decoder
Page: iii
Copyright © 2018 Vislink plc