Perform Inspection While Only The Saved Image Is Displayd (Display Save Image) - Panasonic MICRO-IMAGECHECKER AX40 User Manual

9.4.6 Perform Inspection While Only the Saved Image Is Displayd (Display Save
Image)
Displaying Saved Image
This is a function to display only the latest saved image at the time of inspection. Only the image of which
judgement calculation returned "NG" at the time of inspection can be displayed, if this function is used by
combining "Image Setting" and "Judgement". But, this function is available only if "Memory C1" or "C2" is
set in the RUN mode.
Example:
Inspection time
Judgement results
Image Save
Display Image:
Setting Procedure
1. Select "Save Image Mode" from the ENVIRONMENT menu.
The submenu is displayed.
2. Highlight "Save Mode" .
The subwindow is displayed.
3. Select "Not Overwrite", "Overwrite", or "Display Save Image" .
Now the setting for saving images during inspection is completed.
The 16 sets of last images are always saved. Even if you select "Save Mode" > "Overwrite" from
the Save Image Mode menu, the 16 sets of last images can be set.
• Refer to page 192 for display setting in RUN mode.
• Refer to page 163 for registration of the desired expression as "Image Save" conditional
expression.
202
1st. 2nd.
NG OK
YES (1st. -
picture)
Saved Saved
Image (1) Image (1)
3rd. 4th
NG OK
YES (2nd. -
picture)
Saved Saved
Image (2) Image (2)
5th.
OK
-
Saved
Image (2)