Performance Specifications - Pro-face ST3000 Series Hardware Manual

Hide thumbs Also See for ST3000 Series:
Table of Contents

Advertisement

ST3000 Series Hardware Manual
3.1.2

Performance Specifications

Performance Specifications
*1
Application
Data Backup
Serial
Interface
USB Host
Interface
Clock
*3
Accuracy
*1. It is user active capacity.
*2. AST-3201A units with revision code "C" or later are compliant with RS485.
*3. The ST's internal clock has a slight error. At normal operating temperatures and conditions,
3-4
AST-3201A
COM1: RS232C
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed:
2400 bps to 115.2Kbps
Connector: DSUB-9pin plug
COM2: RS422/RS485
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed:
2400 bps to 115.2 Kbps (RS422/RS485)
187.5 Kbps (MPI)
Connector: DSUB-9pin plug
Complies with USB 1.1. (TYPE-A conn.) x 1
Power Supply Voltage: DC5V
Output Current: 500mA (Max.)
Communication Distance: 5m (Max.)
±
SEE
About Revision (page 12)
with the ST operating from its lithium battery, the degree of error is 65 seconds per month.
Variations in operating conditions and battery life can cause this error to vary from -380 to +90
seconds per month. For systems where this degree of error will be a problem, the user should
be sure to monitor this error and make adjustments when required.
• When the message "RAAA051 Low battery" is displayed, supply power to the display
unit and fully charge the battery. The battery charges within 24 hours to a level which
allows backup operation. Completing a full charge requires about 96 hours (4 days).
• A Lithium battery's lifetime is: 10 years when the battery's ambient temperature is 40°C
or less. 4.1 years when the battery's ambient temperature is 50°C or less. 1.5 years when
the battery's ambient temperature is 60°C or less.
When used for backup:
Approximately 100 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.
FLASH EPROM 6MB
SRAM 320K byte
Used lithium battery for backup memory
*2
±
5%
65 seconds/ month (at room temperature)
AST-3211A
COM1: RS232C
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed:
2400 bps to 115.2Kbps
Connector: DSUB-9pin plug
COM2: RS485(MPI only)
Asynchronous Transmission
Data Length: 7bit/8bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data transmission Speed:
187.5 Kbps (MPI)
Connector: DSUB-9pin socket

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ast-3201aAst-3211aAst-3201a-a1-d24Ast-3211a-a1-d24

Table of Contents