Assembly instruction WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS: Treadmill 1 SET D77 Knob M12 2PCS D78 Knob M8 2PCS C3 Safety key 1PC D3 Allen wrench B18 Silicon oil 1PC 5MM 1PC...
Page 3
STEP 1:Lift up the L/R upright tube (A3L/A3R) STEP 2:Lock the lower part of the treadmill with Knob , then fold the handrail M12(D77) bracket (A4) as the picture show.
Page 4
STEP 3: Lock the upper side of the treadmill with Knob and handrail tube , then M8 (D78) (A4) turn over the computer and get stuck on the handrail tube. Step 4: Put on the Safety key (C13). ATTENTION: Must confirm complete assembly as the required above and lock all bolts. Do the following operations after checking everything is OK.
Page 5
Folding and Unfolding Instruction STEP 1:Turn down the console first and screw out the Knob M8(D78) then turn down the handrail bracket (A4) STEP 2:Lock the Knob M8 (D78) on the uprigt tube, then screw out the Knob M12(D77), and fold the L/R upright tube (A3L/A3R) .
Page 6
STEP3:Lock the Knob M12 (D77) to side cover as picture show. STEP 4:Lift up the folded treadmill and store in the flat surface.
Page 7
Incline Instruction As above drawing, you can adjust lifting angle by changing pin’s position. There are 3 sections adjust key to be used.
Page 8
Operation Guide WINDOW DISPLAY 1.1. 1.2. START Normal start after 5 seconds countdown 1.3 PROGRAM 1 manual mode,12 pre-set programs, 1 body fat program ,3 countdown function 1.4. SAFETY LOCK FUNCTION The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi" alarm noise.
1.5.3 “MODE” BUTTON When the treadmill is not running, press this button to choose countdown modes:”H-1”,”H-2”,”H-3”;:H-1” is the time countdown mode, and “H-2” is the distance countdown mode, “H-3” is the calorie countdown mode; press the “SPEED+/-” button to adjust the data. After that, press the “START”...
1.8 PROGRAM EXERCISE CHART TIME SET TIME/10=EVERY GRADE TIME INTERVAL PROG SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED SPEED 1.9 Manual model operation 1.9.1 Press start key, time count down 5 seconds, then treadmill will start to work with initial speed 0.8km/h 1.9.2 Press speed +/-, you can adjust the speed 1.9.3 Press stop, you can stop treadmill at working state 1.9.4 Press quick speed key, you can quickly adjust the speed you want...
Page 11
The body FAT suits for any male and female to adjust the weight according together with other body quality index. The ideal FAT should be between 20-25, if under 19, it means too thin. If between 25 and 29, it means overweight, if over 30, it means obesity. (The data is just for reference and cannot be as medicinal data) Sex 01 Male 02 Female Age 10------99...
Parts list A-Welding parts Description Description Main frame Filter supporter Left upright tube Motor bracket Right upright tube Handrail connecting tube Handrail bracket Computer supporter B-Plastic parts Description Description Computer chip B16R Right rear cover B1-1 Overlay Silicon oil B1-2 Membrane key Power buckle B1-3...