Table 1: Omx-Sw8X8Nt Front Panel Features; Table 2: Omx-Sw8X8Nt Rear Panel Features - Ocean Matrix OMX-SW8X8NT Instruction Manual

Your OMX-SW8x8NT 8x8 Audio / Video Matrix Switcher
# Feature
1 POWER Switch
2 INPUT Buttons
3 OUTPUT Buttons
4 ALL Button
5 OFF Button
6 7-segment Display
7 VIDEO Button
8 AUDIO Button
9 AFV Button
10 STO (STORE) Button
11 RCL (RECALL)
Button
# Feature
12 AUDIO INPUTS RCA
Connectors
13 AUDIO OUTPUTS RCA
Connectors
14 RS-485 Connector
15 EXT. SYNC BNC
Connector
16 SYNC Source Selector
Button
17 VIDEO INPUTS BNC
Connectors
18 VIDEO OUTPUTS BNC
6
Connectors
19 RS-232 DB 9F Connector
20 Setup Dipswitches
21 Power Connector with Fuse AC connector enabling power supply to the unit
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 When the Audio button illuminates, that is, when the audio breakaway mode is selected
3 When the Video button illuminates, that is, when the video breakaway mode is selected
4 For example, press STO and then the Output button # 3 to store in Setup # 3
5 Only view, nothing is implemented at this stage
6 For RGBS applications, one of the sync channels (H or V) may be used for the S channel

Table 1: OMX-SW8x8NT Front Panel Features

Illuminated switch for turning the unit ON or OFF
Select the input to switch to the output
Select the output to which the input is switched
Pressing ALL followed by an INPUT button, connects that input to all outputs
An OFF-OUT combination disconnects that output from the inputs; an OFF-ALL
combination disconnects all the outputs
Displays the selected audio
above each input)
When pressed button is illuminated and all actions relate to video
When pressed button is illuminated and all actions relate to audio
When pressed button is illuminated and all actions relate to video and audio
channels. Audio channels follow the video channels
Pressing STO followed by an output button stores the current setting
Pressing the RCL button and the corresponding OUTPUT button recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different OUTPUT button lets you view
choice, pressing the RCL button again implements the new status

Table 2: OMX-SW8x8NT Rear Panel Features

Connect to the audio sources
Connect to the audio acceptors
RS-485 port on detachable terminal block
Connects to the external SYNC source
Pushing in selects the (EXT) external sync source on the SYNC connector;
releasing selects the (IN 1) internal sync on the VIDEO IN 1 connector
Connect to the video sources (from 1 to 8)
Connect to the video acceptors (from 1 to 8)
Connects to the PC or other Serial Controller
DIP 1, 2, and 3 for machine SELF ADDRESS #; DIP 4 for RS-485
termination, DIP 5 for reply from switcher to PC, DIP 8 for RS-232 /
RS-485 communication
Function
2 3
or video input switched to the output (marked
5
another setup. After making your
Function
4
1
4