Recalling An Input/Output Configuration; Deleting An Input/Output Configuration; Resetting The Machine - Ocean Matrix OMX-SW8X8NT Instruction Manual

Table of Contents

7.4.2

Recalling an Input/Output Configuration

To recall an input/output configuration, do the following:

1. Press the RCL button.

The RCL button blinks.

2. Press the appropriate INPUT SELECTOR button (the INPUT SELECTOR

button # corresponding to the setup #). The memory recalls the stored data

from that reference.

7.4.3

To delete an input/output configuration, do the following:

1. Press the STO and RCL buttons simultaneously.

Both the STO and RCL buttons blink.

2. Press the appropriate INPUT SELECTOR button.

This erases that specific input/output configuration from the memory, leaving

it empty and available

To reset the machine, press INPUT buttons 1, 2 and 3 simultaneously. The

machine resets itself and a 7-segment self-test is performed automatically.

1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration

Operating OMX-SW8x8NT Matrix Switchers

Table of Contents

Do you have a question about the OMX-SW8X8NT and is the answer not in the manual?