Televic Plixus Series Installation Manual page 138

The microphone of the president is deactivated: {STX}{'p'}{Microphone number (4)} {CRC (4)}
{ETX}
The microphone of a delegate is activated: {STX}{'M'}{Microphone number (4)} {CRC (4)}{ETX}
The microphone of a delegate is deactivated: {STX}{'m'}{Microphone number (4)} {CRC (4)}
{ETX}
The remaining commands are control commands.
All active microphones are deactivated and the camera control should reset itself to a neutral
starting position.
{STX}{'R'}{CRC (4)}{ETX}
At a time-interval of around 5 seconds a synchronization message is sent to the camera control.
The message contains all the numbers of the active microphones or the number 0 to stipulate
that there are no microphones active.
{STX}{'S'}{Microphone Number (4)}1+{CRC (4)}{ETX}
All active microphones are deactivated simultaneously.
{STX}{'V'}{'0000'}{CRC (4)}{ETX}
EXAMPLES
If the president microphone is activated, and the president microphone has the number '0001'
then the following message is sent: %P00010111
When the president microphone is deactivated, then the following message is sent:
%p00010131
If a delegate microphone is activated, and that delegate microphone has the number '0003'
then the following message is sent: %M00030110
When the delegate microphone is deactivated, then the following message is sent:
%m00030130
Suppose now that the delegate microphone with number '0003' is active. On a synchronization
check the synchronization message will look like this: %S00030116
Suppose now that the delegate microphones with number '0002' and '0004' are also active.
On a synchronization check the synchronization message will look like this:
%000300020004029C
NETWO R K SETTING S 1 3 8