Table of Contents
Advertisement
perform the following actions on the units:
: click to swap unit. When a unit is faulty, it will be greyed out in the web
server. Click the icon and enter the serial number of the new unit. Click the
checkmark icon
same type.
: click to modify the seat number. If you do this during the initialization, the
next assigned unit number will be the highest unit number + 1.
: click to remove individual units during initialization. After removal the
microphone LED will blink red again.
It might take several seconds before the microphones start to blink when you click Open
initialization.
You can only manual initialize units with a microphone button. Units without this button (e.g.
Confidea channel selector) are automatically assigned to a seat.
Click Stop initialization to finish and the seats are automatically assigned to the units.
Stopping initialization might take a while, up to one moment depending on the number of
units. The seat number will automatically map to the unit number and the Lingua ID's to desks
in booths according to the setting Desk per booth.
Click Edit configuration to change the following settings
Edit the label of the unit or booth: click the edit icon
booth.
Swap units
Change seat number: click the icon
Priority: click the icon (
unit. A VIP unit has the same speech priority as a chairperson but without the prior/next
and start/stop vote function.
Booth configuration: click the booth icon
Create new booths or group desks by changing booth and desk number.
INITIAL IZATIO N
to confirm. Note that you can only replace units with units of the
:see "Hot swap procedure" for more information.
, specify the seat number and confirm.
(delegate),
to change the label of the unit or
(chairperson) or
) to change priority of the
to change the booth configuration.
1 1 4
Advertisement
Table of Contents
