2. Go to Initialization in the Main menu. When a unit is defective, this item will be greyed out in
the initialization list.
3. Click Edit configuration, units are not reinitialized when you select this option.
4. Click the swap icon
.
5. Fill in the serial number of the unit you want to swap with, the three first numbers are already
completed. (you can find the serial number of the unit on the bottom of the device). It is best to
check that you are replacing the correct unit by checking the serial number of the faulty
device with the one present in the Plixus web server.
INITIAL IZATIO N
1 1 6