Please wait 1 minute for its self-diagnosing when machine starts. Do not disassemble the control units except the professional technician. Follow the user manual and make sure the right wire connection when the device starts. ZK-D1065S User Manual 1...
When the passengers pass through the device, if they carried metals more than preset parameters value, the device would immediately alarms, and display alarm location, let the security guard find the people with the prohibited metal articles timely. 2 ZK-D1065S User Manual...
1 meters. The parameters of the distance are determined by the installation environment, and different installation environments with ZK-D1065S User Manual 3...
Page 6
When installing the devices side by side, the distance between two walk through metal detectors cannot be less than 50cm and the device work frequency must be different. Specific distance parameters according to the actual environment and the selection of the work frequency to adjust. 4 ZK-D1065S User Manual...
Count Statistics: pass count and alarm count. Harmless to human body: harmless to heart pacemaker, pregnant women, magnetic floppy disk, recording tapes etc. Power Supply Security: the power supply on the top of the control box, waterproof. ZK-D1065S User Manual 5...
Page 8
Waterproof Foot Cover: not only can fixed the device, but also waterproof. Waterproof: using PVC synthetic material, special technology, waterproof, fireproof, shockproof. Easy to install: the system is integrated design, just 15 minutes to complete the installation or disassemble. 6 ZK-D1065S User Manual...
Nightclubs, theaters, dance hall, bars and other entertainments where to prevent carrying dangerous metal objects. Banks, postal, hospitals, public buildings, schools, private houses and other places to prevent carrying dangerous metals. ZK-D1065S User Manual 7...
Parts 1. Control Unit Case 2. Alarm zone LED 3. Built-in Probe 4. Infrared Sensors 5. Waterproof Foot Cover 6. Power Line Interface 8 ZK-D1065S User Manual...
Put the control unit case and door panels as above picture shown, and then connect the left and right door panel with the control unit case by bolts. Tightening screws. Probe line of the left and right door panel tight inserted into the motherboard corresponding socket respectively. ZK-D1065S User Manual 9...
Page 12
Lift the walk through metal detector to the vertical position and move to the assigned position. Plug power cable. 10 ZK-D1065S User Manual...
From frequency 1 to frequency 12 is optional. SELECT: choose each program and increase the numerical value when input password. RESET: reset PASS CNT and ALARM CNT. In addition, press ”RESET” for 5 seconds to startup or shutdown. ZK-D1065S User Manual 11...
After connected power supply, the metal detector starts to work. When there is no person or object passes the device, the infrared sensors can effectively stop alarming to avoid false alarm. And accurate count passengers and alarm times. 12 ZK-D1065S User Manual...
“SETUP” to adjust tens digit, press ”ENTER” to adjust unit digit.(the bigger sensitivity levels the higher sensitivity ) Remark ②: Press ”SETUP” to adjust alarm time, the bigger value the longer alarm time. ZK-D1065S User Manual 13...
Page 16
Startup & Shutdown : Press “RESET” five seconds to startup or shutdown. Password input: Press “SETUP” Display to shift”-” Press ”SELECT” 12345 1-345 SELECT Input the correct E0000 password again ENTER Increase the number of”-” Finish 00000 14 ZK-D1065S User Manual...
Page 17
Press “SETUP” Display to shift”-” Input 00000 0-000 password SELECT ENTER ENTER Increase the Finish d-0X number of”-” Remark ④: If you forgot the password, you can input the universal password “88888” to reset a new password. ZK-D1065S User Manual 15...
Note: If you want to decrease the sensitivity in a certain zone, only have to adjust the sensitivity of relative zone. After finished the above adjustment, the metal which smaller than the sample will not alarm, but 16 ZK-D1065S User Manual...
Page 19
If the devices alarms when someone pass through, that means there are some metal objects were hidden in his body. The security guard can use a hand-held metal detector accurately detect the hidden position according to the alarm zones. ZK-D1065S User Manual 17...
In addition, make sure the installation location no wind cause shaking. b. If the false alarm not caused by the environment, please reduce the sensitivity of all zones. c. Change the frequency d. Change the installation location 18 ZK-D1065S User Manual...
Package should contain the following items: (1) L side panel 1set (2) R side panel 1set (3) Control Unit (4) User manual (5) Power cord (6) Threaded bolt 8pcs (7) Hexagon wrench 1pcs (8) Probe cable 2pcs (9) Key 1pcs 20 ZK-D1065S User Manual...
This card will not be supplied again if losing it. Model Number Date Acquisition User Post Code Address User’s Phone Number ZK-D1065S User Manual 21...
Page 24
Date of Maintenance Record of Maintenance Maintainer 22 ZK-D1065S User Manual...
Page 25
ZKTeco Dongguan Industrial Park, No. 26, Pingshan 188, Tangxia, Dongguan, China Tel: +86 769-8210991 / 8210992 / 8210993 www.zkteco.com ZK-D1065S User Manual 1 Copyright@2019 ZKTECO CO., LTD. All rights reserved.