Advertisement
Technical data
General unit data LAL
Environmental
conditions
Building Technologies Division
Mains voltage
With LAL1 / LAL2 / LAL3
Mains frequency
Unit fuse (built-in)
Primary fuse (external)
Weight
Power consumption
Mounting position
Degree of protection
Safety class
Perm. input current at terminal 1
Perm. current rating of control terminals
3, 6, 7, 9...11 and 15...20
Required switching capacity of switching
devices
Between terminals 4 and 5
Between terminals 4 and 12
Between terminals 12 and «LP»
Between terminals 4 and 14
«LP»
Permissible length of the standard detector
cable (laid separately)
Capacity
Starting output (without fan)
Nominal output
Storage
Climatic conditions
Mechanical conditions
Temperature range
Humidity
Transport
Climatic conditions
Mechanical conditions
Temperature range
Humidity
Operation
Climatic conditions
Mechanical conditions
Temperature range
Humidity
Installation altitude
Warning!
Condensation, formation of ice and ingress of water are not permitted!
If this is not observed, there is a risk of loss of safety functions and a risk of
electric shock.
AC 230 V –15 / +10 %
AC 100 V –15 %...AC 110 V +10 %
50...60 Hz ±6 %
T6.3H250V to DIN EN 60127
Max. 10 A (slow)
Approx. 1,000 g
Approx. AC 3.5 VA
Optional
IP40, when fitted, with the exception of the
connection area (terminal base)
II
Max. 5 A continuously
(peaks of 20 A / 20 ms)
Max. 4 A continuously
(peaks of 20 A / 20 ms)
1 A, AC 250 V
1 A, AC 250 V
1 A, AC 250 V
5 A (peaks of 20 A)
5 A
See Technical data, section Flame
supervision
Optional (with ignition < 120 kW)
Optional
DIN EN 60721-3-1
Class 1K3
Class 1M2
-20...+60 °C
<95 % r.h.
DIN EN 60721-3-2
Class 2K2
Class 2M2
-40...+60 °C
<95 % r.h.
DIN EN 60721-3-3
Class 3K5
Class 3M2
-20...+60 °C
<95 % r.h.
Max. 2,000 m above sea level
9/24
CC1N7153en
21.09.2016
Advertisement
