Emptying And Storing; Cleaning And Maintenance - Swann Ceramic Series Manual

Use of the handle
Handle attached to the base unit used for carrying the appliance, it also serves as a
power on/off switch: Lift the handle up to power OFF. Lay it down for power ON. Before
use, please lay the handle down as following method: Press two handle buttons
at the same time to lay down the handle (Fig.14). After use, allow the appliance
completely cool down (Fig.15), put the iron onto power base. Lift handle up. There will
be a "click" sound to indicate the handle has been locked in place and you
can carry the appliance by the handle.

Emptying and storing

1. Disconnect the appliance from the power
supply and allow the appliance to cool
down for 60 minutes at least.
2. After use, slide out the water tank and
pour out all the remaining water. (Fig.16)
3. The iron should be place on the iron rest
plate, and then stored.

Cleaning and Maintenance:

1. Unplug the appliance from the main supply
and let the iron completely cool down.
2. Clean the iron with a damp cloth.
3. Wipe off scale and any other deposits on
the soleplate with a damp cloth or
non-abrasive(liquid) cleaner. (Fig.17)
4. Never clean the appliance under the tap.
Fig.14
12
Fig.15
Fig.16
Fig.17