Important safeguards 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only. 3. The appliance is intended for household use only. 4.
Parts and Features 1. Water tank; 8. Temperature control dial 2. Handle 9. Power cord/Supply hose 3. Soleplate; 10. Power cord 4. Heating indicator light 11. Handle button 5. Steam button 12. Water tank release 6. Steam button lock 13. Filter 7.
Fabric Setting Chart WOOL SILK COTTON Temperature LINEN SYNTHETIC Setting Rayon Synthetics, Rayon cotton, Wool, Fabric cotton, Linen Silk, Nylon, Linen Polyester Arcrylic, Acetate Use a press Dry Iron on Iron while Steam Ironing the opposite cloth and fabric is still Ironing Instruction Steam Iron on...
Ironing Temperature Setting Guide 1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2.
How to use your steam station Prepare the appliance for use: 1. Check if the rating indicated in the rating plate corresponds to the mains voltage in your home. 2. Press handle button to lay handle down. Fig.1 3. Remove the protective foil or sticker or card from the soleplate.
How to use your steam generator Water tank indicator light 1. After power On, water tank indicator light will light up for easy viewing of water level. 2. Water tank indicator light will not light up when water tank or filter are not properly installed.
How to use your steam generator Dry ironing 1. Connect the appliance to a suitable socket outlet. Water tank indicator illuminates to indicate that the unit has been connected to the power supply 2. Set temp setting knob to desired position according to above ironing temperature setting guide or fabric setting chart.
Page 9
Auto-locking function for steam button Press down steam button lock and then push it backwards, steam button will automatically lock . Steam will be produced continually. If you want to stop steam, please push steam button lock forward. Notice: Always turn steam lock off when resting iron on its base or if you leave the iron unattended Pump overheat protection function The pump has an in-built overheat protection circuit.
Filter Replacement Slide water tank out from the base unit, take the filter upward out from water tank,and then replace with a new one. (For better performance, immerse the new filter in water for a few minutes before replacing) Anti-calc system 1.
Cleaning and Maintenance: 1. Unplug the appliance from the main supply and let the iron completely cool down. 2. Clean the iron with a damp cloth. 3. Wipe off scale and any other deposits on the soleplate with a damp cloth or non-abrasive(liquid) cleaner.