Table of Contents
Advertisement
How to use your steam generator
Filter Replacement
1. A filter checking system is built into this
appliance. It can detect the working time for
the filter. Once the filter is invalid ,the filter
replacement indicator light on control panel
will continuously blink to indicate that the
filter needs to be replaced (Fig.8) .
2. Replacement Method: Slide water tank out
from base unit (Fig.9), take the filter out
from water tank (Fig.10), and then replace
with a new one. (Fig.11) After new filter has
been installed into water tank, fill water
tank to Max fill level, and then
slide tank back into base
unit.(Immerse filter in water for several
minutes in order to gain better performance
for future use.)
3. After power up, press steam selection switch
and Power ON/OFF concurrently(Fig.12),
filter replacement indicator light will stop
blinking and return to checking mode
Fig.10
Fig.11
10
Fig.8
Fig.9
Fig.12
Hide quick links:
Advertisement
Table of Contents
