WWW.sWan-BranD.co.uK contents Important Safeguards UK Wiring Instructions Parts and Features Fabric Setting Chart Ironing Temperature Setting Guide How to use your Steam Station Prepare the Appliance for Use Fill Water Tank Steam Ironing Dry Ironing Vertical Steam Ironing Auto Shut Off Function Handle Cord Storage Replacement of Filter...
important safeguards 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only. 3. The appliance is intended for household use only. 4.
WWW.sWan-BranD.co.uK 14. Never use the iron facing towards people because the steam can cause burns. 15. Never twist the supply hose during use. 16. The iron must not be left unattended while it is connected to the mains supply. 17. The iron must be used and rested on a stable surface. 18.
parts and Features 1. Water tank 2. Handle 3. Soleplate 4. Fabric setting display 5. Selection button 6. Steam release 7. Power cord/Connecting supply 8. Power cord (not shown) 9. Handle button 10. Filter...
Fabric setting chart Temperature NYLON POLYESTER RAYON COTTON LINEN Setting Fabric Synthetics Wool Synthetics Cotton Polyester Silk Polyester Wool Wool Cotton Nylon Polyester Linen Acrylic Acetate Ironing Dry ironing Dry iron Steam iron Steam iron Steam iron Instruction on the wrong side of the fabric...
WWW.sWan-BranD.co.uK ironing temperature setting guide 1. Follow the ironing instructions on the garment label. If there is no instruction label, but you know what kind of fabric it is, please refer to the fabric setting chart described opposite. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied.
how to use your steam station prepare the appliance for use 1. Check if the rating indicated in the rating plate corresponds to the main voltage in your home. 2. Press handle button to lay handle down. (When handle is lifted up, the unit is shut off. It will be ON when handle is laid down).
WWW.sWan-BranD.co.uK Fill Water tank 1. Press the water tank lock upwards and slide the detachable water tank outwards from the base. 2. Take the filter upwards out from the water fill hole. (You can take the filter out of the opening for filling water into water tank, or fill water into water tank directly with the filter already in the opening).
steam ironing 1. Fill water tank with clean tap water refering to the filling instructions. For better performance, please immerse filter in water for several minutes before installing it into the water tank. 2. Connect the appliance to a suitable socket outlet. The power indicator light (red) “...
WWW.sWan-BranD.co.uK Note: a. For first use, it is normal that a slight vibrating sound may occur from the electrical pump inside the base unit for a few seconds when steam ironing is started. It is because there is air inside the filter. It will stop when the air inside the filter has been pumped out.
Vertical steam ironing • Follow the steam ironing process, and then hold the iron in a vertical position between 5cm and 15cm away from the hanged fabrics. • Press down steam switch, this will create vertical steam. • This feature is especially used for removing creases from hanging clothes and curtains.
WWW.sWan-BranD.co.uK handle A handle is attached to the base unit for carrying the appliance. It also serves as a power on/off switch: Lifting the handle up turns power OFF and putting the handle down turns power ON. Before use, please put the handle in the down position as follows: •...
cord storage (optional) The unique design for cord storage of base unit provides not only beautiful features but also easy storage. 1. After use, unplug the unit from the mains socket. Pour out the remaining water from the water tank after the unit has completely cooled down. 2.
WWW.sWan-BranD.co.uK anti-calc system anti-cal 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing to prolong the working life of your iron. However, please note that the filter will not completely stop the natural process of limescale build-up.
troubleshooting Problems Possible Causes Solution Iron won't heat. Incorrect connection to Re-plug the unit to mains the mains socket. socket. Handle has not been laid Lay down handle. down. Temp setting is at " " Select the required ironing position. temperature according to Fabric Setting Chart.
August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life. helpline 01733 404703 spares references SI9020TTN-001: Anti-Calc Filter...
Page 20
WWW.sWan-BranD.co.uK Distributed by Swan Products Ltd PO Box 3117 Stoke-on-Trent ST4 9GD Made in China Please note the photographs and illustrations within this manual are for illustration purposes only.