Interface Specifications - Westermo Pilot Wire RPW600M User Manual

Interface specifications

Power
Rated voltage
Operating voltage
Rated current
Rated frequency
Inrush current, I2t
Startup current*
Polarity
Isolation to
Connection
Connector size
Shielded cable
* External supply current capability for proper startup.
Pilot Wire
Isolation to
Connection
Connector size
Shielded cable
Number of ports
Ethernet FX
Isolation to
Connection
Fibre type
Shielded cable
Number of ports
Console
Electrical specification
Data rate
Data format
Transmission range
Isolation to
Connection
8
24 to 110 VDC
19,2 to 154 VDC
200 mA @ 24 VDC
50 mA @ 110 VDC
DC
0.11 A²s @ 48 VDC
0.2 Apeak @ 24VDC
Reverse polarity protected
All other
Detachable screw terminal
0.2 – 2.5 mm² (AWG 24 – 12)
Not required
All other
Detachable screw terminal
0.2 – 2.5 mm² (AWG 24 – 12)
Not required
1
All other
LC
Single-mode 9/125 or 10/125
Not required
1
TTL-level
115.2 kbit/s
8 data bits, none parity, 1 stop bit, no flow control
15 m
All other
2.5 mm jack, use serial console cable
6621-2260