Maintenance - Makita M9800 Series Instruction Manual

3. Put the felt ring, spacer (if necessary), and the
sanding pad on the dust attachment and then secure
them with the application tool installation bolt.
4
5
6
7
► 1 . Joint 2. Nozzle band 3. Dust nozzle 4. Dust
attachment 5. Spacer 6. Felt ring (ø 47 mm) 7. Pad
(with STARLOCK marking) 8. Application tool instal-
lation bolt 9. Felt ring (ø 37 mm) 10. Pad (with OIS
marking)
NOTICE:
When using the pad with STARLOCK
marking, be sure to install the spacer between the
dust attachment and the felt ring.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
2
3
9
10
8
Cleaning
From time to time wipe off the tool using a dry cloth or a
cloth dampened in soapy water.
8 ENGLISH