ENGLISH (Original instructions) SPECIFICATIONS Model M193 Planing width 82 mm Planing depth 1 mm Shiplapping depth 6 mm No load speed (min 16,000 Overall length 290 mm Net weight 2.7 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
If operating a power tool in a damp location is preventive safety measures reduce the risk of unavoidable, use a residual current device starting the power tool accidentally. (RCD) protected supply. Use of an RCD reduces 21. Store idle power tools out of the reach of the risk of electric shock.
Depth of cut may be adjusted by simply turning the knob cause vibration and shorten tool life. on the front of the tool. 17. Use only Makita blades specified in this Switch action manual. 18. Always use the correct dust mask/respirator 1.
Page 5
Use only the Makita wrench provided to remove or • 1. Mini planer blade install the blades. Failure to do so may result in 2.
Page 6
To remove the blades on the drum, unscrew the three adjusting plate. Now slip the heel of the adjusting plate installation bolts with the socket wrench. The drum cover into the drum groove, then fit the drum cover on it. comes off together with the blades.
Adjust the edge fence until it comes in contact with the OPERATION side of the workpiece, then secure it by tightening the screw. Planing operation 1. Screw 1. End 2. Edge fence 2. Start 004846 004844 When planing, move the tool with the edge fence flush First, rest the tool front base flat upon the workpiece with the side of the workpiece.
Hold the holder so that the both To maintain product SAFETY and RELIABILITY, repairs, blades contact the dressing stone for simultaneous any other maintenance or adjustment should be sharpening at the same angle. performed by Makita Authorized Service Centers, always using Makita replacement parts. 004953...