Makita M9800 Series Instruction Manual
Hide thumbs
Also See for M9800 Series:
- Instruction manual (55 pages) ,
- Instruction manual (53 pages) ,
- Instruction manual (53 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita M9800 Series
Summary of Contents for Makita M9800 Series
- Page 1 INSTRUCTION MANUAL Multi Tool M9800 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: M9800 Oscillation per minute 15,000 - 22,000 min Oscillation angle, left/right 1.6 ° (3.2 ° total) Overall length 283 mm Net weight 1.2 - 1.3 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. -
Page 3: Ec Declaration Of Conformity
Vibration The following table shows the vibration total value (tri-axial vector sum) determined according to applicable standard. Work mode Vibration emission Uncertainty (K) Applicable standard Sanding (a 2.5 m/s 1.5 m/s EN62841-2-4 Cutting with plunge cut saw blade (a 8.0 m/s 1.5 m/s EN62841-1 Cutting with segmental saw blade (a... -
Page 4: Multi Tool Safety Warnings
Remove any adjusting key or wrench before Maintain power tools and accessories. Check for turning the power tool on. A wrench or a key left misalignment or binding of moving parts, break- attached to a rotating part of the power tool may age of parts and any other condition that may result in personal injury. -
Page 5: Functional Description
Always switch off and wait for the blade to 28. If working place is extremely hot and humid, come to a complete stop before removing the or badly polluted by conductive dust, use a blade from the workpiece. short-circuit breaker (30 mA) to assure opera- tor safety. - Page 6 As sanding papers have holes for dust extraction, Adjusting the orbital stroke rate mount a sanding paper so that the holes in a sanding paper match those in the sanding pad. The orbital stroke rate is adjustable. To change the orbital To remove a sanding paper, raise its end and peel it off. stroke rate, turn the dial between 1 and 5.
-
Page 7: Operation
OPERATION NOTE: Using a test material sample to try is recom- mendable to determine a correct orbital stroke rate suitable for your work. WARNING: Before starting the tool and NOTE: Use a sanding paper with the same grit until during operation, keep your hand and face away sanding the whole workpiece is completed. -
Page 8: Maintenance
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 8 ENGLISH... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885697-220 www.makita.com 20181130...
Need help?
Do you have a question about the M9800 Series and is the answer not in the manual?
Questions and answers