Operating Elements - VOLTCRAFT LCR-100 Operating Instructions Manual

7. Operating elements

1 LCD display
2 RANGE button for manual measuring range selection
3 HOLD button for "freezing" the display value
4 Toggle key for dually assigned measuring functions (diode test and continuity test)
5 Rotary switch
6 Plus measuring socket (+) for all inductance measuring ranges (mH/H)
7 Minus measuring socket (-) for all inductance measuring ranges (mH/H)
8 Minus measuring socket (-) for resistance and capacity measuring ranges and diode/continuity tests
9 Plus measuring socket (+) for resistance and capacity measuring ranges and diode/continuity tests
10 Light button for turning the display illumination on and off
11 MAX/MIN button
12 REL button for reference value measuring
13 Battery compartment
14 Foldable setup brackets
24