Targus Stow-N-Go AKP01EU User Manual page 6

• The keypad goes into sleep mode after 4 minutes of
non-operation. To wake the keypad, press the
NumLock key.
Establishing a Communications link
After your computer detects the USB receiver you may
need to establish a communications link between the
receiver and the keypad before you can use it.
1 Plug the receiver into your computer's USB port and
turn on the keypad.
NOTE: M
YOUR COMPUTER HAS DETECTED THE
A COMMUNICATIONS LINK
On/Off Switch
The LED on the receiver will flash for 30 seconds to
indicate ID search mode.
Targus Wireless Stow-N-Go
AKE SURE THAT YOUR COMPUTER AND KEYPAD ARE TURNED ON AND
.
TM
Keypad
USB
RECEIVER BEFORE YOU ESTABLISH
Reset Button
6