Targus Wireless Numeric Keypad Introduction Thank you for your purchase of the Targus Wireless Numeric Keypad. This keypad is designed with a storable USB receiver, providing ease of use when travelling. Contents • Targus Wireless Numeric Keypad • 1 x AAA Battery •...
Targus Wireless Numeric Keypad Installing the Batteries 1. Remove the battery cover from the back of the keypad. 2. Insert the supplied battery, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment.
Targus Wireless Numeric Keypad Connecting to Your Computer 1. Remove the USB receiver from the back of the keypad. 2. Plug the USB receiver into an available USB port on your computer. 3. Power on the keypad by using the On/Off switch located on the back of the keypad.
Targus Wireless Numeric Keypad Re-Establishing a New Connection If the response time of the keypad is slow or it intermittently stops working: 1. Unplug the USB receiver from the computer. 2. Plug the USB receiver into another available USB port and the LED indicator will flash for 1 minute to indicate pairing mode is activated.
Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss.