Targus Stow-N-Go AKP01EU User Manual page 5

3 Slide the battery cover back into position until it
"clicks" firmly into place.
Connecting the Receiver
To connect the receiver:
1 Remove the receiver from the back of the keypad.
2 Plug the USB receiver into an available USB port on
your computer.
For Windows® 98, follow any on-screen instructions
to complete the default driver installation.
For Windows® Me/2000/XP/Windows Vista™, the
"Found
device" message will appear to indicate the installa-
tion of the default driver.
NOTE: Y
OU MAY NEED TO ESTABLISH A COMMUNICATION LINK BETWEEN THE
KEYPAD AND THE RECEIVER
Turning the Keypad On and
Off
• To power on the battery, use the on/off switch located
on the back of the keypad.
• To power off the battery, use the on/off switch located
on the back of the keypad. This feature should be used
when traveling to prevent power loss.
• To turn on the keypad, press the NumLock key, located
directly above the number seven key.
Targus Wireless Stow-N-Go
New Hardware" or "Auto-detect of a HID
. S "E
EE
TM
C
STABLISHING A OMMUN
5
Keypad
- L
ICATIONS
"
INK