Targus Stow-N-Go AKP01EU User Manual page 10

positive (+) and negative (-) connections in the battery
housing.
• Check that the receiver's USB connector is firmly
attached to the USB port on your computer.
• Verify that the device drivers are installed.
• Make sure you have established a communication link.
See "Establishing a Communications Link".
When I use the keypad, other wireless devices
work more slowly or fail temporarily – what
should I do?
• The keypad may cause interference with any cordless,
radio-based device that operates at 27 MHz, such as a
telephone, baby monitor, or toy. To reduce interference,
move the keypad's receiver and the base unit of the
affected device as far away from each other as
possible.
• You can also reset the keypad's identification code. To
do this, see "Establishing a Commun-ications Link".
What do I do if the response time of the key-
pad is slow or it intermittently stops working?
Try one or more of the following:
• Increase the distance between the receiver and the
rest of your computer equipment by connecting the
extension cable provided.
• Increase the distance between the receiver and the
base units of other wireless devices.
• Turn off any wireless devices and their base units that
are near the keypad's receiver.
Targus Wireless Stow-N-Go
TM
10
Keypad