Part Identifications; Location Requirements - Gleamous GL5 Instruction Manual

Part Identifications

OUTLINE DRAWING OF GL5
POWER
INDICATOR
MODE
CHANGE KEY
TEMP.
REGULATING
KEY-
HOT WATER OUTLET PIPE
Installation Manual
Opening the Packing Materials
Attention: Do not remove any of the permanent instructions and labels.
Dismantle the exterior packing and place all components aside.
Inspect all parts prior to installation and start-up. Make sure there is no visible
damage.
Carefully read all instructions before installation.
After installation, dispose of packaging material in the proper manner.

Location Requirements

Select a suitable location near point of use.
Hot water pipe should be kept as short as possible to prevent excessive heat loss.
POWER
CORD
DISPLAY SCREEN
TEMP. REGULATING
KEY+
ON/OFF
COLD WATER INLET PIPE
2