Table of Contents
Advertisement
Maintenance instruction
C
lean the heater with a damp cloth. It is ok to clean the cover with mild detergent, but DO NOT use
turpentine, alcohol, petrol or any other corrosive solutions.
Trouble Shooting
Trouble
The
Water
leakage
from
connected
water inlet or outlet
gasket damaged
Power indicator is not
No power to water heater
lit light
Power indicator is damaged
No water supply or water inlet
valve shut off
Wrong connection of water
Water
output
is
not
inlet and outlet
normal
or
no
water
Water pressure is lower than
output
2L/min
The filter mesh in the water
inlet is jammed
Shower head is jammed
Water temp. is too high
Temerature set too high
Temerature set too low
Water temp. is too low
Water flow rate is too high
Cause
water
pipe
is not
Reconnected the water pipe or change
well
or
er
rubb
the gasket
Turn on power switch. Check for blown
fuses or tripped breaker
Change the power indicator
Wait for water supply or open the inlet
valve
Change to the correct connection.
Use when the water pressure is nornal.
Clean the filter mesh
Clean the shower head
Set temperature to desired setting
Set temperature to desired setting
Decrease water flow
Solution
9
Advertisement
Table of Contents
