Nilfisk-Advance SW900 Operating Manuallines page 2

ATTENTION!
Do not use the machine before you have read and understood the User Manual.
The machine
doesn't work
as it should.
1. Check if the battery is charged and
The machine does
not collect debris/
dust
1. Check if the fl aps are correctly ad-
The machine do
not sweep.
1. Adjust the main broom position by
5. Replace the brooms if the bristles are
Nilfi sk-Advance A/S Tel.: +45 43 23 40 50
Sognevej 25 Fax: +45 43 43 77 00
DK-2605 Brøndby mail.com@nilfi sk-advance.com
Denmark www.nilfi sk.com
2. Check if the main battery connector
that the charger cable is disconnect- is properly connected.
ed from the main.
2. Check if the panel fi lter is clean the
justed and not worn out. gasket properly sealing.
2 Adjust the side brooms position by
the knob. the register screw.
wornout.
TROUBLESHOOTING
SW900
3. Check if the main circuit breaker is
open.
3. Check if the gasket is damaged.
3. Check if there are external materials
avoiding brush rotating.
4. ecure that the upper cover and hop-
per is in the right position.
4. Check if the hopper is full.
4. Check if the circuit breaker for side
brooms is open.