Removing The Respirator; Disconnecting The G1 Push-To-Connect Regulator - MSA PremAire Cadet Escape G1 Operating Manual

4

Removing the Respirator

4.1

Disconnecting the G1 Push-to-Connect Regulator

(1) Grasp the regulator buttons.
(2) Push the release buttons and pull the regulator out of face-
piece.
(3) Close the cylinder valve fully.
(4) Open the regulator bypass or press the purge button (if
equipped) to release system pressure. Close the bypass.
(5) Stow the regulator in the regulator keeper when it is not in
use.
PremAire Cadet Escape G1
Removing the Respirator
US
19