Roles And Permissions Panel - Extron electronics MGP 641 User Manual

Figure 35.
When finished viewing the input information, click the X in the upper-right corner of the
dialog box to close it.

Roles and Permissions Panel

In this panel (see figure 33,
passwords. The web password is administrator level.
NOTES:
• The initial factory configured passwords for all accounts on this device have
been set to the device serial number. Passwords are case sensitive. In the
event of an absolute system reset, the passwords are reset to extron.
The following rules apply to passwords:
•
•
•
•
•
•
•
Setting a password
To assign new administrator and user passwords:
In the Roles and Permissions panel, click Edit. The Role and Permission
1.
Settings dialog box opens
2. In the Admin panel, click the Change Admin Password link and enter the new
administrator password in the field below (see figure 36,
Inputs Dialog Box for an MGP 641
on page 81) you can set and remove administrator and user
3
Length is 1-128 characters.
All human-readable characters are permitted except | .
The password cannot be a single space unless you are removing the
password entirely.
Passwords are case-sensitive.
A user password cannot be assigned if no administrator password exists.
If the Admin password is cleared, the user password is cleared as well.
MGP 641 Series • HTML Configuration and Control
on the next page).
1
83