Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
RK1240 and RK1240C
12-ton, Single-acting,
Die-type Crimping Tools
Serial Codes GAB and ADL
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
99926989
© 2011 Greenlee Textron Inc.
IM 1337 REV 7 9/11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Textron Greenlee RK1240
Summary of Contents for Textron Greenlee RK1240
- Page 1 Serial Codes GAB and ADL Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 99926989 © 2011 Greenlee Textron Inc. IM 1337 REV 7 9/11...
-
Page 2: Table Of Contents
All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Dynapress is a registered trademark of Greenlee Textron Inc. -
Page 3: Important Safety Information
Hazards which, if not avoided, COULD result in severe injury or death. Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 4 Note: Keep all decals clean and legible, and replace when necessary. Pinch points: Keep hands away from closing dies. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 5: Identification
Crimp Force ................10.9 metric tons (12 tons) Crimp Capacity ............750 kcmil copper and aluminum lugs, taps, and splices Power Source Required ..............700 bar (10,000 psi) Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 6: Setup
Inspect tool and dies before use. Replace any worn or damaged parts. A damaged or improperly assembled tool could break and strike nearby personnel with suf- ficient force to cause severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 7: Operation
700 bar (10,000 psi). Refer to the “Periodic Relief Valve Check” in this manual. 5. Stop the power source and allow the ram to retract. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 8: Die Selection
60176; 400 to Aluminum VACL BLUA column instead of the YA-ATN 2ACL/2ACN 60230 to 750 kcmil: Lugs number provided with 60278 3 crimps the connector. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 9: Maintenance
Pinch points: Keep hands away from closing dies. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 10: Assembly
(24) to the 3/8 Coupler (25). Assemble to the Ram (15) as far as they will go. Place the U-cup Seal cylinder. (21) on the Ram. Step 4. Installing the Ram Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 11: Illustration And Parts List
RK1240 and RK1240C Crimping Tools Illustration Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 12 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...
Need help?
Do you have a question about the Greenlee RK1240 and is the answer not in the manual?
Questions and answers