Textron Greenlee LP6 GMA Series Instruction Manual
Textron Greenlee LP6 GMA Series Instruction Manual

Textron Greenlee LP6 GMA Series Instruction Manual

Hydraulic crimping tool

Advertisement

Quick Links

INSTRUCTION MANUAL
LP6
Hydraulic Crimping Tool
Serial Codes GMA, GMB, GMD, and GME
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
52062769 REV 1
© 2013 Greenlee Textron Inc.
1/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Greenlee LP6 GMA Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Textron Greenlee LP6 GMA Series

  • Page 1 Serial Codes GMA, GMB, GMD, and GME Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 52062769 REV 1 © 2013 Greenlee Textron Inc. 1/13...
  • Page 2: Table Of Contents

    SAE Standard J1273 (Hose and Hose Assemblies): Publication 99930323 All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. KEEP THIS MANUAL Greenlee / A Textron Company 4455 Boeing Dr.
  • Page 3: Important Safety Information

    Wear hearing protection when using this tool. Long-term exposure to high noise levels could result in hearing damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 4 Use other than that which is described in this injury or death. manual could result in injury or property damage. Failure to observe these warnings could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 5 Note: Keep all decals clean and legible, and replace oil, wash the affected area immediately to remove when necessary. the oil. Failure to observe these precautions may result in injury. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 6: Identification

    LP6 Hydraulic Crimping Tool Identification 1. Crimping Head 5. Trigger Strap 2. Lock Pin 6. Pressure (supply) Port 3. Cylinder 7. Tank (return) Port 4. Trigger 8. Handle Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 7: Specifications

    * 13.8 bar (200 psi) is the maximum agreed standard back pressure for the HTMA (Hydraulic Tool Manufacturers Association). Greenlee Utility tools will operate satisfactorily at this standard. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 8: Hoses And Fittings

    3. Disconnect the pressure hose from the power source, and then from the tool. 4. Disconnect the return hose from the tool, and then from the power source. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 9: Operation

    Keep hands away from the crimping tool head when crimping. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 10 Failure to observe this warning could result in severe injury or death. Crimping Direction First Compression Crimping Direction SIDE B First Compression SIDE A First Compression SIDE B Crimping Direction SIDE A Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 11: Maintenance

    Quarterly or Every 500 Crimps Perform the “Periodic Pressure Relief Valve Check.” Annually If required by your organization’s regulations, send the tool to a Greenlee Utility Authorized Service Center. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 12: Troubleshooting

    Dies caught on crimped connector. Twist crimping tool from side to side to free it from the connector. Excessive system back pressure. Troubleshoot the hydraulic system. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 13: Illustrations And Parts Lists

    LP6 Hydraulic Crimping Tool Illustration Main Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 14 LP6 Hydraulic Crimping Tool Illustration Ram Unit Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 15 Crimping Jaw Units CJD3BG CJD3O 118A 118A 110A 110C 118A 118A CJD3 CJK Kearney 118B 118C 110B 110D glued in with Loctite 270 (green) 118C 118B Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 16 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...

Table of Contents