Textron Greenlee RK6040 Instruction Manual

Textron Greenlee RK6040 Instruction Manual

60-ton, single-acting, die-type crimping tool

Advertisement

Quick Links

INSTRUCTION MANUAL
RK6040
60-ton, Single-acting,
Die-type Crimping Tool
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
99946700 REV 4
© 2010 Greenlee Textron Inc.
3/10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Greenlee RK6040 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Textron Greenlee RK6040

  • Page 1 INSTRUCTION MANUAL RK6040 60-ton, Single-acting, Die-type Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 99946700 REV 4 © 2010 Greenlee Textron Inc. 3/10...
  • Page 2: Table Of Contents

    All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Dynapress is a registered trademark of Greenlee Textron Inc.
  • Page 3: Important Safety Information

    Hazards which, if not avoided, COULD result in severe injury or death. Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 4 Note: Keep all decals clean and legible, and replace when necessary. Pinch points: Keep hands away from closing dies. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 5: Identification

    Die Type ............Burndy “L” type and Alcoa 6000 series Crimp Force ..................530 kN (60 tons) Power Source Required ..............700 bar (10,000 psi) Oil Capacity Required.................312 cc (0.75 pint) Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 6: Setup

    A damaged or improperly assem- bled tool can break and strike nearby personnel with sufficient force to cause severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 7: Operation

    5. Stop the power source and allow the ram to retract. Relief valve adjustments must be performed accord- ing to the instructions provided with the hydraulic power source. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 8 RK6040 60-ton Crimping Tool Illustration 19 EXPLODED Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 9 Seal kit (includes items marked with an asterisk) † 52033900 Die retaIning kit (includes items marked with †) > 52054978 Handle assembly kit < 52054976 Cap hardware kit Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
  • Page 10 800-435-0786 Fax: 800-451-2632 815-397-7070 Fax: 815-397-1865 Canada 800-435-0786 Fax: 800-524-2853 International +1-815-397-7070 Fax: +1-815-397-9247 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 • An ISO 9001 Company Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...

Table of Contents