Samsung CLX-2160 User Manual page 57

Message Meaning
Install Toner The color toner
cartridge is not
installed. The arrow
indicates which color
toner cartridge.
Install The corresponding
Imaging Unit Imaging Unit of the
machine is not
installed.
Invalid Toner The color toner
cartridge you have
installed is not for
your machine. The
arrow indicates
which color toner
cartridge.
Invalid The Imaging Unit of
Imaging Unit the machine is not
for your machine.
Low Heat Error There is a problem
in the fuser unit.
Cycle Power
LSU Hsync Error A problem has
occurred in the LSU
Cycle Power
(Laser Scanning
Unit).
LSU Motor Error A problem has
occurred in the LSU
Cycle Power
(Laser Scanning
Unit).
Main Motor There is a problem
Locked in the main motor.
Manual Feeder There is no paper in
Paper Empty the manual feeder.
Manual Feeder Paper has jammed
Paper Jam 0 in the feeding area
of the manual feeder.
Not Enough Space The space for USB
In USB Memory memory device is not
enough, which is for
scanning and saving.
Network Error There is a problem
with the network.
Suggested solutions
Install the color toner
cartridge.
Install Imaging Unit
into your machine.
Install the a
Samsung-genuine
color toner cartridge
designed for your
machine.
Install the a
Samsung-genuine
part designed for your
machine.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Open and then close
the front cover.
Load paper in the
manual feeder.
Clear the jam. See
page 11.2.
Check the available
USB memory space.
See page 9.4.
Contact your network
administrator.
11.4
Message Meaning
Open Heat Error There is a problem
in the fuser unit.
Cycle Power
Out-Bin Full The output tray of
the machine is full of
paper.
Over Heat Error There is a problem
in the fuser unit.
Cycle Power
Paper Jam 0 Paper has jammed
in the feeding area
Open/Close Door
of the tray.
Scan Unit Open The scan unit is not
securely latched.
or Paper Jam2
Paper has jammed
in the paper exit
area.
Paper Jam 1 Paper has jammed
In the fuser area or
Open/Close Door
rear cover.
Tray The paper size
Paper Mismatch specified in the
printer properties
does not match the
paper you are
loading.
Refilled Toner The toner cartridge
you have installed is
not genuine or
refilled. The arrow
indicates which color
toner cartridge.
Replace Toner This message
appears between
Toner Empty and
Toner Low status.
The arrow indicates
which color toner
cartridge.
<Troubleshooting>
Suggested solutions
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Remove paper.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Clear the jam. See
page 11.1, 11.2.
Close the scan until it
locks into place.
Clear the jam. See
page 11.2.
Clear the jam. See
page 11.2.
Load the correct
paper in the tray 1.
The print quality may
get poor if the refilled
toner cartridge is
installed, since its
characteristics may
significantly differ
from the genuine.
We recommend
Samsung-genuine
color toner cartridge.
Replace the toner
cartridge with a new
one. See page 10.5.