Planmeca Ethernet Interface Installation Manual page 9

INSTALLATION OF THE PLANMECA ETHERNET INTERFACE BOX TO THE DIXI3 DIGITAL INTRA X-RAY
Open then the Internet Explorer, insert the Planmeca Ethernet Interface default IP address
192.168.0.135. Without this default IP Address you can not configurate your Ethernet Inter-
face.
In the appearing Ethernet Interface window select Configurations on your left-hand side. The
following window enables you to change the factory default IP Address and TCP Port. Con-
sult the local network administrator about the IP address settings you can use. After saving
your configuration return to the Ethernet Interface window to check your configuration.
Installation manual Planmeca Ethernet interface 5