Bartscher PS 0,9L-W Manual page 5


Thoroughly clean the housing under hot running water, dry and disinfect it with the
disposable towel.

Place the dosing pump back in the housing by holding the operating lever in the
upper position and sliding the dosing pump into the housing from the rear. If possible,
do not touch the tube, otherwise wipe it with the disposable towel before placing it
into the disinfectant dispenser container.

Wipe the rear wall of the dosing pump. Finally, place the housing with the dosing
pump onto the wall holder.

Fill up the disinfectant container and place it in the housing.

Dispense the disinfectant several times.

After long breaks in the disinfectant dispenser use, thoroughly clean and disinfect it
before using it again.
Auxiliary equipment (not included in the delivery)
Drip tray PS 0,9L-W
 Material:
- Stainless steel, polypropylene
 Collection tray:
- W 147 x D 240 x H 40 mm
- Suitable for dishwasher
 Dimensions:
W 147 x D 285 x H 377 mm
 Weight: 0.5 kg
Code-No.: 850018
Hook the drip tray holder behind the disinfectant dispenser.
The drip tray is designed for drop collection during hand disinfection.
The collection tray may be removed for cleaning at any time, cleaned manually with a
mild cleaning agent or in a dishwasher.
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten
Germany
- 8 -
phone: +49 5258 971-0
fax: +49 5258 971-120
Service-Hotline: +49 5258 971-197
www.bartscher.com