Bartscher PS 0,9L-W Manual page 3

List of parts
1
Operating lever
2
Nozzle protection guard
3
Nozzle
4
Dispensing pump with tube
5
Disinfectant container
6
Housing
7
Front guard
Prior to installation

Unpack the disinfectant dispenser and attachment material and dispose of the
packaging material according to the environment protection regulations.

Place the disinfectant dispenser above the sink or close nearby.

Observe the following information during installation:
- Space required above the disinfectant dispenser. 40 mm
Recommended installation height: 130 – 135 cm, measured from the floor
-
to the upper edge of the disinfectant dispenser.
Wall-mounting

Slightly lift the container and remove it
from the disinfectant dispenser.

Press the locking button and pull the wall
holder down from the housing.

Using the openings in the wall holder mark
3 spots to drill the holes and drill the holes
in the wall.

Insert the included pins in the drilled holes.
Mount the wall holder with the included bolts.
- 6 -
1
2
3
4
7
6
5