Switch Names And Functions - Hitachi PSC-5S Installation And Operation Manual

8.

SWITCH NAMES AND FUNCTIONS

Liquid Crystal Display Section
The figure below shows all the indications for reference.The actual display during operation is
different.
Indication of
Group Number
(Page 16)
I
ndication of
Louver Angle
(Page 18)
Indication of Fan
Speed (Page 18)
Indication of
Operation Mode
(Page 17)
"AUTO" is indicated
only when the
optional function
"Auto COOL/HEAT"
is set.
Run Indicator (Red
Lamp) (Page 16)
RUN/STOP Switch
(Page 19)
Fan Speed
Selection Switch
(Page 17)
Operation Mode
Selection Switch
(Page 17)
Timer Selection
Switch (Page 21)
Operation Switch Section
The above figure shows the central station with the cover opened.
When opening the cover, pull the cover toward the arrow direction.
SWITCH NAMES AND FUNCTIONS
Indication of
Timer
(Page 21)
Indication of Emergency Stop
(Page 21)
Indication of "NO FUNCTION"
Indication of Each Group
Operation (Page 16)
"Remote Control Switch
Auto Louver
Not Available" Switch
Switch
(Page 14)
(Page 12)
Indication of
Indication of
Demand Control
Setting temperature
(Page 21)
(Page 17)
Indication of
Alarm Code
(Page 21)
Indication of
"Remote Control
Switch Not Available"
(Page 19)
"ALARM" Indicator
(Page 21)
"FILTER" Indicator
(Page 22)
Group Selection Switch
(Page 17)
"FILTER" Indication
Reset Switch (Page 22)
Check Switch
(Page 17)
Do not touch.
This switch is only for
service use.
This switch is not
used.
Temperature Setting
Switch
(Page 17)
/
15
8