Hints And Tips - Electrolux GA55SLICN User Manual

14 www.electrolux.com
Starting a programme
1. Press the on/off button to activate the
appliance.
2. Close the appliance door.
3. Set the programme and options.
4. Press the OK key, the programme
starts.
If the salt and rinse aid refilling messages
show in the display, the programme will
not start. Press the OK key again to start
the programme.
How to delay the start of a
programme
1. Set the programme and options.
2. Set the delay start
You can delay the start of a programme
from 1 to 24 hours.
3. Press the OK key, the countdown
starts.
If the salt and rinse aid refilling messages
show in the display, the countdown will
not start. Press the OK key again to start
the countdown.
When the countdown is completed, the
programme starts automatically.
Opening the door while the
appliance operates
If you open the door while a programme is
running, the appliance stops. When you
close the door, the appliance continues
from the point of interruption.

10. HINTS AND TIPS

10.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When
needed, use the prewash programme
(if available) or select a programme with
a prewash phase.
• Always use the whole space of the
baskets.
• When loading the appliance, make
sure that the dishes can be completely
If the door is opened for more
that 30 seconds during the
drying phase, the running
programme will end.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default values.
1. Press the Cancel key.
The display shows Confirm cancel?.
2. Press the Cancel key to confirm.
Cancelling a running programme
1. Press the Cancel key.
The display shows Confirm cancel?.
2. Press the Cancel key, to cancel the
programme.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of programme
When the programme is completed the
display shows Programme finished and
Please switch off.
1. Press the on/off button or wait for the
AUTO OFF function to automatically
deactivate the appliance.
2. Close the water tap.
reached and washed by the water
released from the spray arm nozzles.
Make sure that items do not touch or
cover each other.
• You can use dishwasher detergent,
rinse aid and salt separately or you can
use the multi-tablets (e.g. ''3in1'',
''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
Multi-tablets are usually suitable in
areas with a water hardness up to 21
°dH. In areas exceeding this limit, rinse
aid and salt must also be used. If you
use multi-tablets you can select the
Multitab option (if available). This option