EUFAB JAMO Manual page 14

Optionally available
(needs to be ordered separately)
Art. No. 11402 a quick release fastener for fast and simple assembly to the towbar.
Art. No. 11232 lockable frame holder 115mm
Art. No. 11234 lockable frame holder 180mm for the 3
Art. No. 11233 lockable frame holder 310mm
And because the attachment for the 3
you will also need the lockable frame holder 11234. This frame holder can be fitted with
large clips on both sides. This set of clips is included in the delivery scope.
Art. No. 11442 wedge washer
Wedge washer
In the case of some towbars, the rack table may tilt somewhat toward the road surface.
To compensate this tilt, we also supply a wedge washer which is position between the
base and the rack table.
Base
Wedge washer
Art. No. 11441 adapter plate to increase the distance from the towbar to the rack table in
case the boot of the car cannot be opened.
All these parts can be combined with each other and will be supplied with the required
attachment materials. All original conversion parts are officially approved. Please observe
the assembly instructions to ensure proper and secure assembly.
If in doubt with regard to these instructions, please contact your dealer or the
manufacturer for further information.
rd
cycle
rd
cycle involves attachments from cycle to cycle,
Rack table
14