Removal Procedure Of Outdoor Unit; Remove Cable Cross Plate 2 And Valve Cover; Remove Top Cover - Gree LIVV09HP230V1A Series Service & Parts Manual

Service Manual

11.2 Removal Procedure of Outdoor Unit

LIVV12HP230V1AO LIVV09HP230V1AO
Take heat pump for example.
Steps

1.Remove cable cross plate 2 and valve cover

Before disassamble.
Remove 3 connection screw fixing cable
cross plate 2 and then remove the Cable
cross plate 2.
Remove 1 connection screw fixing valve cover
and then remove the valve cover.

2.Remove top cover

Remove 3 connection screws among
top cover plate, front panel and right
side plate. Then remove top cover
plate.
Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.
Procedure
Cable cross plate 2
top cover plate
101
screw
Valve Cover
screw