WARNING!
Risk of Injury, Damage or Death
Conditions such as restlessness, mental deterioration,
dementia, seizure disorders (uncontrolled body
movement) or sleeping problems may cause injury,
damage or death.
– Monitor patients with these conditions frequently.
– Close supervision and attention is needed when
operating the wheelchair near children, pets or people
with physical/mental disabilities.
WARNING!
Risk of Injury or Damage
To avoid injury or damage from moving parts:
– ALWAYS keep hands and fingers clear of moving parts.
– Closely supervise children, pets, or people with
physical/mental disabilities.
WARNING!
Risk of Injury or Damage
Improper operation may change the normal balance,
center of gravity or weight distribution of the wheelchair
causing injury or damage.
– Determine and establish your particular safety limits.
Practice bending, reaching and transferring activities
in several combinations in the presence of a qualified
healthcare professional before attempting active use
of the wheelchair.
– ALWAYS shift your weight in the direction you are
turning. Shifting your weight in the opposite direction
of the turn may cause the inside drive wheel to lose
traction.
1143192-L-03
WARNING!
Risk of Serious Injury
Impacting objects in the surrounding environment can
cause serious injury.
– When maneuvering the wheelchair around, ALWAYS
have assured cleared distance with all objects in
environment.
WARNING!
– Always check grips for looseness before using the
wheelchair. If loose, contact a qualified technician for
instructions.
WARNING!
Risk of Injury or Damage
Unintended movement or operation of wheelchair may
cause injury or damage.
– Turn power OFF BEFORE entering or exiting the
wheelchair.
– Close supervision and attention is needed when
operating the wheelchair near children pets or people
with physical/mental disabilities. Turn power off.
– Turn power off when near children, pets or people
with physical/mental disabilities.
Safety and Handling
15
Need help?
Do you have a question about the ASBA and is the answer not in the manual?