Honeywell VARIODYN D1 Installation Instruction page 41


Connection of the DOM
LIVE SIGNAL
DOM 1 DOM 2 DOM 3
Connection example  DOM
VCM
DOM 1
5 6 7 8
1 2 3 4
•
Do not connect terminals DOM 2 and DOM 3.
•
For the connection diagram of the DOM inputs/outputs, see chapter 6.1.
6.2.1 Specification - VCM
Back-up power supply
Power consumption
Air Humidity
Ambient temperature
Storage temperature
Housing
Colour
Weight
Dimensions (W x H x D)
Specification
FB 798663.GB0 / 05.19
Monitoring of the life sign signals takes place via the control
contacts of DOM 1. Use cable type I-Y (St) Y 2 x 2 x 0.8 mm and
the enclosed two-pin plug to make the connection. The
connection to one DOM is sufficient for monitoring of the life sign
signals.
Max. cable cross-section: 1.5 mm²
DOM 1
Installation Instruction VARIODYN
: 24 V DC
: 10 mA @ 24 V DC
: 40 % ... 90 % rel. hum. (non-condensing)
: -5 °C ... +55 °C
: -10 °C ... +60 °C
: metal
: grey, similar to RAL 716
: approx. 0,9 kg
: 483 x 44 x 33 mm (1 HU)
: EN 54-16
®
D1 System
41