Honeywell VARIODYN D1 Installation Instruction page 19

drawer rail or
installation bracket
below the amplifier
Fig. 8: Example installation of devices with installation bracket (Example)
Device
Amplifier 2XH250 / 2XH500
Amplifier 2XD250 / 2XD400
Amplifier 4XD und 4XV-Serie
Main-Switch-Unit (MSU)
5HU
6HU
Fig. 9: Sample arrangement of the devices
•
As a rule, in a cabinet, the heavy devices should be installed on the bottom and the lighter
components should be installed towards the top. Two power amplifiers installed on top of each other
must be additionally fastened with suitable installation brackets.
•
If components are included in addition to the MSU (SCU, UIM, VCM), they should also be installed
with a ventilation field below them and fastened with corresponding installation brackets.
FB 798663.GB0 / 05.19
Installation Instruction VARIODYN
DOM
PA1
PA2
Weight Device
approx. 17 Kg Digital-Output-Module (DOM 4-8)
approx. 19 Kg Digital-Output-Module (DOM 4-24)
approx. 14 Kg View-Control-Module (VCM)
approx. 4,2 Kg Universal-Interface-Module (UIM)
System-Communication-Unit (SCU)
Example
total weight ca. 40 kg
UIM
MSU
SCU
VCM
Ventilation field
DOM
PA1
PA2
Ventilation field
®
D1 System
DOM
PA1 = 2 x 200 W
PA2 = 2 x 200 W
Weight
approx. 5,7 Kg
approx. 6,5 Kg
approx. 0,9 Kg
approx. 3,6 Kg
approx. 3 Kg
19