Remote Controller Antenna; The Use Of Parameters Setting Software Of Remote Controller; Parameters Setting Software Instruction - Foxtech T30s User Manual

CPU
LINK
Signal strength
indicator RS1,
RS2, RS3

6.3. Remote Controller Antenna

The T30s is available in several versions such as the R20 version, V20 video&data link
version, and no communications version. Different version, the type and frequency of
the two antennas A1 (right) and A2 (left) mounted on the remote control are different.
Version
R20
V20
V30
No
communications
P900+4G version
7. The Use of Parameters Setting Software of
Remote Controller

7.1. Parameters Setting Software Instruction

Parameters Setting Software of Remote Controller
open the T30 special software HZYT30, you can enter the main interface as shown in
the figure above.
flicker
ON
OFF
ON
RS1, RS2, RS3 ON
RS1&RS2 ON, RS3 OFF
RS1 ON，RS2&RS3 OFF
RS1&RS2&RS3 OFF or
Show the running horse lights
Antenna type&frequency
WIFI(2.4GHz)
of A1(on the right side)
PMDDL(2.3GHz)
1.4GHZ(secondary)
WIFI(2.4GHz)
4G
'HZYT30'version: 'V1.0.4.1'. Turn on the remote control and
No video signal input
There is video signal input
No data link connection
Successful connection of airborne
unit and ground unit
Strong signal
Moderate signal
Weak signal
No connection
Antenna type&frequency of
P900(902～928MHz)
A2(on the right side)
PMDDL(2.3GHz)
1.4GHZ(main)
Bluetooth(2.4GHz)
P900(902～928MHz)
- 19 -