V20 Receiver Indicator Instruction; V30 Receiver Indicator Instruction - Foxtech T30s User Manual

Indicator light shows normal, buzzer with
continuous short sound

6.2.2. V20 Receiver Indicator Instruction

Indicator
CPU
Sbus1
Sbus2
L1 and L2 both ON
LAN
WAN
Receiving and
transmitting
indicator TX
Receiving and
transmitting
indicator RX
Signal strength
indicator RS1,
RS2, RS3

6.2.3. V30 Receiver Indicator Instruction

Indicator
25%、50%、75%, 100%
ON
4 lights flicker and the
buzzer with continuous
short sound
flicker
Status
ON
OFF
flicker
OFF
flicker
flicker
flicker
flicker
OFF
flicker
OFF
RS1, RS2, RS3 ON
RS1&RS2 ON, RS3 OFF
RS1 ON，RS2&RS3 OFF
RS1&RS2&RS3 OFF or
Show the running horse lights
Status
Full capacity 100%
High temperature protection
condition
Remote controller idle alarm
No video signal input
Define
There is video signal input
SBUS1 without signal transmission
SBUS 1 with signal transmission
SBUS2 without signal transmission
SBUS2 with signal transmission
Receiver is in firmware upgrading
mode
the LAN port is connected
the WAN port is connected
data transmitting
No data transmitting
Data receiving
No data receiving
Strong signal
Moderate signal
Weak signal
No connection
Define
- 18 -