Advertisement
Model
SFP-XG-LH40-SM155
0
Flexible interface platform modules
The HSR6600 Router Series supports flexible interface platform (FIP) modules FIP- 1 0 and FIP-20. You can
install High-speed Interface Modules (HIMs) and Multifunctional Interface Modules (MIMs) on a FIP to
support different network services as needed. A FIP module is located on the lower part of the front
panel.
NOTE:
No FIP modules are supplied with the router. Purchase them yourself.
FIP-10
The FIP- 1 0 supports only MIMs, and you can plug at most four MIMs into a FIP.
Figure 71 FIP-10 front panel
(1) Slot 4
(3) OPEN BOOK mark
(5) Slot 1
The OPEN BOOK mark indicates that the operator must read the following sections before working with
the FIP:
Table 37 References for FIP operations
Operation
Install and remove the FIP
Install and remove MIMs
Connect network cables
Connect optical fibers
Central
Connector
wavelength
type
1550 nm
LC
Reference
See
"Installing a FIP
See
"Installing a
See
"Connecting an Ethernet
See
"Connecting a fiber
81
Fiber type
9/125μm single mode
(2) Slot 3
(4) Status LED (RUN)
(6) Slot 2
module" and
"Replacing a FIP
HIM/MIM" and
"Replacing a
cable."
cable."
Max. transmission
distance
40 km (24.86 miles)
module."
HIM/MIM."
Advertisement
