Advertisement
Table 12 Output description
Field
Slot 0
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
The operation is not supported on
the specified board or subslot
Displaying the CPU usage of a module
Use the display cpu-usage command to display the CPU usage of the module in each slot.
<Sysname> display cpu-usage
Slot 0 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Output description
Field
Slot 0 CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Displaying the memory usage of a module
Use the display memory command to display the memory information of the device.
<Sysname> display memory
System Total Memory(bytes): 3639590560
Total Used Memory(bytes): 369429132
Used Rate: 10%
Description
Router or interface module slot
Router or module type
Router or module serial number
MAC address of the router or interface module:
•
An device has a MAC address.
•
A service module does not have a MAC address, and the field is
displayed as NONE.
Manufacturing data of the router or interface module
Vendor name
Displaying electronic label information by using the display device
manuinfo command is not supported.
Description
CPU usage of the module in slot 0.
Average CPU usage in the last five seconds (after the router boots, the router
calculates and records the average usage at the interval of five seconds).
Average CPU usage in the last minute (after the router boots, the router
calculates and records the average usage at the interval of one minute).
Average CPU usage in the last five minutes (after the router boots, the router
calculates and records the average usage at the interval of five minutes).
52
Advertisement
