Advertisement
Touch only the edges, instead of electronic components when observing or moving a removed
•
memory module, CF card, HIM, or MIM.
To use the ESD-preventive wrist strap, perform the following steps:
1.
Wear the wrist strap on your wrist.
2.
Lock the wrist strap tight around your wrist to keep good contact with the skin.
3.
Attach the ESD-preventive wrist strap to the alligator clips.
4.
Attach the alligator clips to the rack post.
5.
Make sure that the rack is well grounded.
CAUTION:
Check the resistance of the ESD-preventive wrist strap for safety. The resistance reading should be in the
•
range of 1 to 10 megohm (Mohm) between human body and the ground.
The HSR6600 does not provide any ESD-preventive wrist strap. Prepare it yourself.
•
Figure 2 Use an ESD-preventive wrist strap
1
2
(1) ESD-preventive wrist strap
(3) Alligator clip
EMI
All electromagnetic interference (EMI) sources, from outside or inside of the router and application system,
adversely affect the router in a conduction pattern of capacitance coupling, inductance coupling,
electromagnetic wave radiation, or common impedance (including grounding system) coupling. To
prevent EMI, perform the following tasks:
Take measures against interference from the power grid.
•
Do not use the router together with the grounding equipment or light-prevention equipment of
•
power equipment, and keep the router far away from them.
Keep the router far away from high-power radio launchers, radars, and equipment with high
•
frequency or high current.
3
(2) Lock
5
Advertisement
