Using The Jcm Dfu Downloader - JCM GEN5 Manual

GEN5™ Printer

USING THE JCM DFU DOWNLOADER

To update the GEN5 Printer Firmware, proceed as follows:
1. Connect a USB Cable between the USB Update Port on the right side of the
GEN5 Printer (refer to Figure 2
2. Apply power to the GEN5 Printer.
3. From the PC Desktop, double-click on the
icon.
The Printer status will display as
b
4. If no Printer is detected, Drivers will need to be installed. (Drivers are installed
automatically when the Printer is connected to a PC.)
NOTE: If Printer Drivers need to be installed manually, contact JCM Technical Support
at (800) 683-7248.
5. Click on
The PC's web browser opens automatically.
6. Select the proper Firmware version.
The
JCM DFU Downloader
- File Name
-
File Type (DFU, SHA)
-
Printer Model Format
7. Ensure the
Part No. 960-000193R_Rev. A
JCM® Training Overview
c
a
Figure 12 JCM DFU Downloader Application UI
Select FIRMWARE
Erase User Settings
k on page 4) and the PC.
JCM DFU Downloader Application
1 device connected
.
screen will indicate the following information:
check box is selected (Figure 12
1 4
September, 2017
(Figure 12 ).
a
).
b
© 2017 JCM American Corporation