Magicinfo Lite Settings - Samsung DE40A User Manual

7
Network
Delete: Deletes the devices from the list.

This function only deletes the name of the device from the list. If the deleted device is turned on or
tries to connect to the product, it may appear on the list again.
Using the Media Function
An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile
phone will be displayed on your product. The contents are played automatically 3 seconds after the alarm
window appears. If you press the
contents are not played.
The first time a device accesses your product through the media function, a warning popup

window appears. Press the [
product freely and use the
To turn off media contents transmissions from a mobile phone, set

Settings.
Contents may not play on your product depending on their resolution and format.

The [

Using the mobile device, you can control the media play. For details, refer to each mobile's user's

guide.
7.4

MagicInfo Lite Settings

O
m
MENU
1
Server
Setting the

Enter the server IP address and port number.

Use 7001 as the port number.

FTP Mode

Select an FTP operating mode:

Default Storage

Specify the default memory to save schedules or content sent from the server to.

If the default storage space is set to USB, a schedule will not run if a USB device is not

connected.
Send a notification message to the server when internal memory is used up.

2
Storage
RETURN or
] button to select Allow. This permits the phone to access the
Media function to play content.
] and / buttons may not work depending on the type of media content.
Network MagicInfo Lite Settings
MagicInfo Lite server IP
If unable to connect to the server using port number 7001, check with your server
administrator to find the correct port number and then change the port number.
EXIT button when the alarm window appears, the media
ENTER[
Active or Passive.
Media to Off in the AllShare
]
7 Network
139